Reasons and solutions for the motor of the dispensing machine not resetting

The characteristics of motors are compact size, low price, and stable operation. Electric motors are widely used in the industrial control industry, and are no exception in dispensing machine equipment. The use of a motor in the dispensing machine equipment can automatically restore the dispensing machine to the set state after startup. If the motor does not show any recovery after the dispensing machine is turned on, it indicates that there is a problem with the dispensing machine. So where did the problem go and what should be done to solve it? Today, Xinghua editor will analyze the reasons and solutions for the motor of the dispensing machine not resetting.

Reasons and solutions for the motor of the dispensing machine not resetting

Reason 1: Problem with the emergency stop button of the dispensing machine

Solution: Check if the emergency stop button of the dispensing machine is pressed.

Reason 2: Wiring problem with the dispensing machine

Solution: Open the chassis, check if the hardware connection of the dispensing machine is correct, confirm if the driver is powered on, and confirm if the driver, emergency stop switch, and jumper settings are correct; Please confirm that all ribbon cables, serial cables, and other wiring are correct.

Reason 3: Incorrect firmware or configuration file of the dispensing machine

Solution: The firmware upgrade of the dispensing machine may not have been successful, or the configuration file update may not have been successful. Upgrade the firmware again and configure the mechanical parameters; Also, there is no automatic reset set for startup.

The above are the common reasons and solutions for the glue dispensing machine motor not resetting. I believe everyone will have a better understanding after reading it. If you want to learn more about dispensing machines or need to purchase dispensing machines, you can consult Xinghua Zhizao customer service online, or directly call customer service at 400-892-8288.